This 80 Amp electricity sub meter is ideal for use in locations where you would like to know how much electricity is used by individual single phase circuits such as:
- Electric vehicle / electric car charger monitoring
- Granny flat
- Workshop
- Dedicated single circuit (air conditioning, electric hot water, pool, spa, cool room, etc)
- Checking electricity use at a sub-board when the utility meter is far away or not easily accessed.
Got a smaller site? Check out the smaller Single Phase 45 Amp Sub Meter.
Got 3 phase power? See our 3 Phase Sub Meter.
The display screen shows total (cumulative) usage in kWh. It is designed to be installed at your electricity switch board or meter board.
80 Amp Single Pole kWh Sub Meter - Specifications
| Voltage | 240V +/-20% |
| Current | 80A maximum |
| Accuracy | Class 1 (± 1% accuracy) |
| International Standard | IEC 62053-21 |
| Frequency | 50-60Hz |
| Display Reading | kilowatt-hours (kWh) |
| Max Reading | 99,999.99 kWh, non-resettable |
| Display Type | LCD with backlight |
| LED Pulse Output | 1000 impulses per kWh |
| Internal Power Use |
<2W |
| Data Storage | Up to 10 years without power |
| Operating Temperature | -30°C to 55° Celsius |
| Cable Size | Up to 50mm² (8mm diameter) |
| Dimensions | 140mm high x 36mm wide x 70mm deep. (90mm tall with covers removed) |
| Weight | 176 grams |
| Installation | Must be completed by an electrician. Standard DIN RAIL mount, two slots wide. |
| Further Details |
Brochure (PDF), Manual (PDF) and Wiring Diagram (JPG) |
Frequently Asked Questions
Does it store data in a blackout or power outage?
Yes - data will remain stored for up to 10 years without power.
Is the display backlit?
Yes - You can choose the backlight to be always on, off or only illuminate when you press the 'SEL' button. Backlight preference can be set using the 'PRG' button. See details in the Manual provided in the specifications table above.
Can I use it with a wireless energy monitor?
Yes - the PowerPal Energy Monitor can be paired with this sub meter. This allows you to track your usage in more detail and away from the switchboard. The impulse setting for this meter is 1000imp/kWh.